Note: Concentrated, Ultimate, & Impact
Loads are applied on a one square inch area point load. Results above indicate
weakest port of panel. Other strengths available-consult factory. For further
information and product specifications, call us at (949) 837-9194.
1. Loads to be applied anywhere on panel; permanent set after application
of concentrated load shall be 0.010"
2. Local and beam top surface deformation shall not exeed 0.040", 10 pass
test uses a 3" x 1 13/16" wide phenolic wheel, 10,000 pass test uses an
8" x 5" wide alathane wheel.
3. Loads applied on a one square inch area. Results above indicate weakest
point of panel.